Boat Thruster Guide

What to buy, what it costs, what it takes to fit

We may earn a referral commission from some links on this page. It doesn't change your price or our recommendations.

Thruster specs

VETUS BOW PRO Boosted 130: specs, price and the boats it fits

The Bow Pro Boosted 130 is the strongest Boosted model in VETUS’s mid-size tube, with 287 lb of push for boats of about 40 to 60 ft. You get variable-speed joystick control and a brushless motor, with a built-in charger feeding its own batteries.

Pricing is by quotation from VETUS dealers. The tube, control panel, main switch and fuses add about $533 to $1,358, and the unit needs two batteries of its own near the bow. Because the charger is inside the thruster, the cable back to your 12 V system can be lighter than a direct feed. See every part.

It shares the 10-minute BOW PRO rating, and VETUS says battery charge is what really limits a long push. If your boat sits near the top of its range, compare the yard work with the Boosted 150, which needs a larger tube. Zinc yearly; warranty through the dealer.

Installers will find the wiring figures and dimensions further down. For the rest of VETUS’s line, read the VETUS thruster review.

Where this summary comes from (5 sources, read 12 October 2026)

Key facts

  • DIY level 2 of 5 Wiring prep only
  • Thrust 287 lb 130 kgf, VETUS's rating
  • Boat length 40 to 60 ft VETUS's own range
  • Price $6,369 equipment only, fisheriessupply.com, 15 October 2026
  • Fitted by a yard $14,967 to $24,911 Our estimate at 50 ft, unit and job
  • Voltage 12 V or 24 V As sold
  • Mounts Tunnel Fixed mount, bow or stern
  • To fit it Haul-out The boat comes out of the water
  • Run limit 10 min At a stretch, the user manual's S2 rating

Every figure here is the maker’s or a dealer’s, except the fitted cost, which is our estimate. The full spec sheet is further down.

How much of the install is yours

DIY 2 of 5: Wiring prep only. The yard fits the unit and does the hull work; you do the wiring prep.

DIY levels

  • Level 5: Owner install. No yard, no electrician.
  • Level 4: You fit it, electrician connects. You mount and wire it; a marine electrician makes the final connections.
  • Level 3: Split with the yard. The yard does the below-waterline part; you do the wiring.
  • Level 2: Wiring prep only. The yard fits the unit and does the hull work; you do the wiring prep.
  • Level 1: Yard job. A qualified professional does all of it.

You Yard Electrician. The bar is labor hours; a haul-out is a note.

How we rate DIY

You: 4 to 16 h Yard: 32 to 70 h Electrician: 2 to 4 h Plus a haul-out.

  1. Cut, bond and fair the tunnel; fit the gear leg, motor and propeller Yard 32 to 70 h The low end is two crew over two days, the job as owners describe it on the forums. The high end rises with boat length between two real billed figures: 32 hours at 35 ft, and the largest invoice we hold, 70 hours at 47 ft.
  2. Mount the battery box, switch and fuse holder; run and secure the cables You 4 to 16 h Our estimate. No maker times this step, and a first-time owner is slower than a yard, so the range is wide.
  3. Final connections at the battery and the motor, load test Electrician 2 to 4 h Our estimate. Nobody publishes a time for the final connections and test on their own.

Your part needs:Heavy battery cableCrimping big lugs

A qualified marine electrician should make the final connections and test them before first use. Hours are labor only.

Is it right for your boat?

What VETUS says 40 to 60 ft The maker's own range, from its listing
What our sizing says 42 to 65 ft Full thrust in 15 knots. The longest boat of each kind is in the table.

Our figure is the longest boat one unit can steer in a 15 knot wind. It is a range because each kind of boat catches the wind differently. Here a houseboat gets full thrust to 42 ft, and a catamaran to 65 ft. The maker gives one range for every boat.

The table below tries the VETUS BOW PRO Boosted 130 on each kind of boat, at every length that kind of boat is built in. The wind is 15 knots and the rules are the finder’s own. A length counts as a fit when the unit gives the thrust that boat needs at the bow and the maker lists it for that length.

A boat up to 10 percent past the maker’s range still counts here, as it does in the finder. So the table runs down to 36 ft and up to 66 ft, just past VETUS’s own range (40 to 60 ft).

The VETUS BOW PRO Boosted 130 against each kind of boat, in a 15 knot wind. Our sizing, from the finder’s own rules.
Boat Full thrust at 15 knotsStill a fit, in lighter wind
Pontoon & tritoon Not listed. A pontoon has no hull body between the logs to bore a tunnel through, and nobody sells one for these boats.
Sailboat 48 to 57 ft 58 to 66 ftfull thrust to about 13 knots at 66 ft
Houseboat 36 to 42 ft 43 to 63 ftfull thrust to about 10 knots at 63 ft
Catamaran 54 to 65 ft 66 ft onlyfull thrust to just under 15 knots at 66 ft
Trawler 47 to 56 ft 57 to 66 ftfull thrust to about 13 knots at 66 ft
Motor yacht 47 to 56 ft 57 to 66 ftfull thrust to about 13 knots at 66 ft
Bass & flats Not listed. Nobody sells a tunnel kit for these hulls, and a bass boat’s shallow planing bow has almost no depth to hold one.
Wake & ski boats Not listed. Nobody sells a tunnel kit for these hulls.
Express cruiser 60 to 65 ft None
Center console No length. More thrust than the boat needs.

Reading the two length columns. The first column is where one unit gives all the thrust the boat needs in 15 knots. The second is where the finder still lists it: the unit falls short of what the boat needs by no more than 10 percent, and gives the whole figure only in the lighter wind named. On a boat shorter than the first column’s shortest length, the unit is more than the boat needs.

It is sized for six kinds of boat here. For your own boat, the finder gives an answer that also counts your drive and who does the fitting. The compare page sets this unit beside others.

What it costs fitted

These totals are our estimate of a yard job: the unit’s price, plus a yard’s hours at $160 to $180 an hour, plus the batteries, cable and charger, plus the other parts the box does not hold. A Lifting the boat out of the water on a travel lift or a trailer so work can be done below the waterline. It is billed separately from the job itself. adds $640 to $3,180 at these lengths, with 5 to 7 days out of the water, worked from eight yards’ own rate cards. The hours come from what owners and yards report. Your own yard will have its own opinion. The cost page builds the same figures line by line.

The VETUS BOW PRO Boosted 130 fitted by a yard, from the shortest to the longest boat it is sized for. Our estimate.
Boat length The unit Yard labor Haul-out Batteries, cable, charger Other parts Total
36 ft $6,369 $5,120 to $6,30032 to 35 hours $640 to $1,740 $1,955 to $2,174 $533 to $1,358 $14,617 to $17,941
50 ft $6,369 $5,120 to $12,60032 to 70 hours $990 to $2,410 $1,955 to $2,174 $533 to $1,358 $14,967 to $24,911
66 ft $6,369 $5,120 to $12,60032 to 70 hours $1,260 to $3,180 $1,955 to $2,174 $533 to $1,358 $15,237 to $25,681

How the batteries, cable and charger add up. We price a battery bank close to the thruster, as the makers recommend, with 10 to 20 ft of cable out and back: red for the positive, black for the negative, cut to length. The low end is the cheapest battery that meets the figure and the shorter run; the high end is a sealed (AGM) battery and the longer run. The charger is a NOCO GEN5X2 two-bank shore charger.

Batteries and lugs are priced at Fisheries Supply and the cable and charger at Defender, read 12 October 2026.

  • At 24 V: two 12 V batteries in series, at least 185 Ah each (VETUS’s minimum), $1,860 for both; VETUS’s cable table gives 1/0 to 3/0 AWG, priced on 1/0 to 4/0 AWG, the nearest size cut to length: $95 to $314 for the red and black cable and the lugs; no charger, as the unit carries its own.

The sizing and the costs on this page are estimates, for guidance only and without warranty. They are no quote, and nobody has inspected your boat. Check them against the maker’s manual and your yard before you rely on them. Terms of use.

What else you buy

What follows comes from VETUS’s BOW55D installation manual 020522.11 r08 and the BOW PRO Boosted manual 020808.04 r09, May 2026 and February 2026, read 30 September 2026.

In the box
The unit assembled or in parts, the zinc anode, insulated gaskets, the drill template, the solenoid switches and the 5 A control fuse on the motor. BOW PRO: the thruster fuse in the connection unit.
Bought separately
The tunnel, the main switch (BATSW250 or BATSW600), the main fuse (ZE) and holder (ZEHC100), the cable, the control panel and its cable.
Charging
Every VETUS manual wants "its own separate battery or batteries" near the thruster, sealed if it shares the motor's compartment. The BOW PRO Boosted units carry a charger (12 V, 80 A) fed from the boat's bank, with a fused feed cable. The other manuals show an alternator and a battery separator on the wiring diagram and say nothing more.

The manual’s words, page 22 of the Boosted manual: “By connecting the 24 Volt battery bank to the MCVB boosted charge connection, the 48 Volt, battery bank is charged. An additional charging facility is not required.”

The “other parts” line in the estimate above is the priced parts below, $533 to $1,358 at Fisheries Supply’s prices on 30 September 2026. The batteries, cable and charger have a line of their own.

Parts the VETUS BOW PRO Boosted 130’s box leaves to you, from the makers’ manuals read 30 September 2026. “What to ask for” is VETUS’s own part or model where its manual names one, otherwise the dealer’s item.
Part What it is What to ask for Dealer price
Tunnel tube The fiberglass, aluminum or steel pipe the thruster sits in, bonded through the bow. BP185G10, BP185G15 (40 in, 60 in) $205–$554185 mm fiberglass tunnel tubes up to 60 in (1.5 m) long (VETUS, Sleipner Side-Power, Lewmar), at Fisheries Supply, read 16 October 2026.
Control panel The buttons or joystick at the helm. One helm, one panel: a second steering station needs a panel of its own. BPSE2 push buttons, BPJSTA joystick, BPJE2 or EZDOCK2 $219–$374Side-Power touch panel and single joystick, VETUS push-button panel, Lewmar single joystick, at Fisheries Supply.
Control cable, panel to motor The thin cable from the helm to the motor. Sold by length. VETUS panel cable, by length $29–$173Side-Power control cables, VETUS panel cables, Lewmar Gen 2 connecting cables, at Fisheries Supply.
Main fuse A slow-blow fuse of the ANL type at the battery, in the size the maker prints for the model. ZE series slow-blow, the rating in the yard table below $18–$57Side-Power ANL fuses, Blue Sea ANL fuses, at Fisheries Supply, read 16 October 2026.
Fuse holder The block the ANL fuse bolts into, with a cover. ZEHC100 $27–$93Egis and Blue Sea ANL fuse blocks, Side-Power ANL fuse holders, at Fisheries Supply, read 16 October 2026.
Main battery switch The switch that cuts the thruster off from its battery when you leave the boat. BATSW250 (BATSW600 on the bigger units), or BPMAIN12/24 for a remote switch $35–$107Egis m-Series 300 A, Blue Sea e-Series 350 A and HD-Series 600 A on/off switches, at Fisheries Supply, read 16 October 2026.
Battery cable and lugs The two heavy cables from the battery to the motor, sized to the length of the run. The wiring calculator sizes them. VETUS names none In the electrical line
Battery bank A cranking-type bank near the motor, sized by the maker's cold cranking amps. The battery calculator checks it. VETUS names none In the electrical line
Glass, resin, filler and sealant What bonds the tube or housing into the hull and seals the gear leg. VETUS names none Not priced

The cost page has the whole list with what every maker says about each part.

For the yard and the installer

The full spec sheet, grouped the way a yard reads it. Every figure is the maker’s or a dealer’s, with its source.

The VETUS BOW PRO Boosted 130, every published figure the site holds, with where each came from.
Thrust and motor
Thrust 287 lb (130 kgf) As printed: Thrust (kgf): 130 (VETUS webshop product page)
Motor5.7 kW
Voltage12 V or 24 V
Fitting
TypeTunnel, fixed mount
End of the boatBow or stern
Tunnel diameter185 mm
What it does to the hullTunnel bore below the waterline
Haul-out to fit itYes
Maker’s boat length40 to 60 ft
Price and ordering
Price $6,369 equipment only, a dealer's price, fisheriessupply.com, 15 October 2026
Part number BOWB13012/24 V
Documents
Manual Installation manual (PDF)on the maker's site
Warranty VETUS gives 3 years, or 1 for professional use, and it transfers to the next owner. Claims go through the dealer only. It is void unless an authorized VETUS dealer does the periodic maintenance, and transport, labor and lifting are excluded. VETUS's warranty policy
The site’s reviewVETUS thruster review

Draw, cable, fuse and battery, at each voltage

These are the maker’s own figures, at each voltage it is sold at. The cable is the size for the shortest run in the maker’s table. A longer run may need heavier cable, and the wiring calculator works that out for your own boat.

The VETUS BOW PRO Boosted 130’s draw, cable, fuse, battery and run limit, as the maker publishes them.
Voltage Draw Maker’s cable Fuse Battery Run limit
24 V 300 Anominal draw 1/0 AWG for up to 16 ft of cable counted out and back. Longer runs take heavier cableinstallation manual 020808.04, r09, February 2026 355 A, and 300 A (ZE300) in the controllerinstallation manual 020808.04, r09, February 2026 2 x 185 Ah - 12 V, in amp-hoursVETUS installation manual 020808.04, r09, February 2026 10 min at a stretch, the user manual's S2 ratingBOW PRO user manual

What holds up and what to weigh

Each point names the fact it rests on.

What holds up

  • VETUS sells it for either end, so it can go at the bow or the stern.The maker's listing
  • It is sold at 12 V and at 24 V.The maker's and dealers' listings

What to weigh

  • The boat comes out of the water to fit it: it needs a tunnel bore below the waterline.The mounting: a bore through the hull, or a housing recessed into it

What the manual and listings say

This is the note we keep on the VETUS BOW PRO Boosted 130, written from the maker’s manual, its product pages and the dealer’s listing.

In the box: A charger is built in (12 V, 80 A), fed from the boat's own bank. Proportional: the joystick sets how hard it pushes. The thruster fuse sits in the connection unit.

Our note

The biggest of the 185 mm Boosted units, 12/24 V. Boosted means the thruster runs on its own bank, charged from the boat's system through a built-in charger (80 A at 12 V, fused at 100 A). So the feed cable is sized for the charger, not the motor. It is brushless and proportional, so the joystick sets how hard it pushes instead of switching it on and off.

The installation manual rates it at 10 minutes (S2). The user manual says run time is mainly limited by the battery. The US press release's "unlimited runtime" appears in neither. The manual gives 300 A at 24 V (345 at 21) and an example battery of two 185 Ah 12 V batteries.

It calls for a 355 A main fuse and a 300 A fuse in the controller that must stay in place. It gives 1 AWG cable to 16.1 ft of total run. The manual's cable table prints one band backwards ("19,7 - 18,6 m"). The 185 mm manual's feed table prints its feet column short (40 m as 35.1 ft). Read the metres.

The product page prints "Voltage (V) 46380" where "12/24" belongs, a spreadsheet date. We found no US dealer listing. VETUS publishes no price.

Videos

Two of VETUS’s own videos, from its YouTube channel: the BOW PRO range in short, and the full BOW PRO electrical and mechanical install. They are the maker’s pitch. Watch them for what the unit looks like and how it goes in, and take any claim back to the figures above.

VETUS’s own video, on VETUS’s YouTube channel. The picture is a still from it.
VETUS’s own video, on VETUS’s YouTube channel. The picture is a still from it.

Other sizes and close alternatives

These are VETUS’s next sizes in the same line, by thrust.

These are other makers’ units of the same style, for the same end, within a quarter of its published thrust. Each is that maker’s nearest match.

Compare them side by side

Every model with a page here is listed, maker by maker, on the thruster index.

Where to go next

The specs are the maker’s and the dealers’, on the dates shown. The sizing and the costs are our arithmetic, done without seeing your boat.