We may earn a referral commission from some links on this page. It doesn't change your price or our recommendations.
Discontinued thruster
Sleipner SEP150/215T-24V (discontinued): specs, manual and parts
The Sleipner SEP150/215T-24V is a tunnel thruster. The motor sits inside the boat and turns a propeller in a tube through the hull. Sleipner has discontinued it. Its own product page said so when we read it on 1 October 2026.
This page stays up for the owners still running one. It holds the published figures, the part numbers, the manual and the last price we read. You will not find the unit in the thruster finder, the tool here that matches a unit to your boat, or on the compare page. If you need a new thruster, start with either of those.
The published figures
| Type | Tunnel, fixed mount |
|---|---|
| Thrust | 401 lb (182 kgf) |
| As the maker printed it | Thrust at 24V: 182kg / 401lbs; at 21V: 150kg / 331lbs |
| Voltage | 24 V |
| Tunnel diameter | 215 mm |
| Maker’s boat length | 44 to 64 ft |
| Part number | 88347424V |
| Last price we read | $6,885equipment only, defender.com, 28 August 2026. It may no longer be for sale there. |
| Manual | Sleipner’s manual for it |
Service parts
These are Sleipner’s own part numbers for the parts an owner replaces, where we could find them: the pin that drives the propeller, the propeller, the anode, the brushes, the switch gear, the fuse and the motor. We read them on 11 October 2026. The last column says how we know each one fits this model. Give the dealer your thruster’s serial number from its label when you order.
| Part | Part number | Sleipner’s name for it | How we know it fits |
|---|---|---|---|
| Drive pin (the pin that drives the propeller) | 9 1241 | Drive pin propeller SE120-300 | By the part’s name only. Confirm with your serial number.Sleipner describes it as fitting SE120 to SE170 units. This model is not on its list. |
| Propeller | 9 1261 | Propeller SE120/150 5bl Q-Prop, 215 mm | By the part’s name only. Confirm with your serial number. |
| Anode | 20 1180 A | Anode kit (Al-Zn-In), for 215/300 mm gear legs | By the part’s name only. Confirm with your serial number. |
| Anode, zinc version | 20 1180 | Anode, zinc SE120/SE130/SE170/SP155/220/285 | By the part’s name only. Confirm with your serial number. |
| Gear leg gasket | 9 1355 | Gasket for gearleg/tunnel SE120/150 | By the part’s name only. Confirm with your serial number. |
| Motor brush kit | BRUSH-14K | Brush kit SP155 + SE150/170 | By the part’s name only. Confirm with your serial number.Sleipner asks for the thruster’s serial number with every brush kit order. |
| Solenoid (the motor switch) | 1013702 | Solenoid SE150/170/210/250/300 | Sleipner’s parts page lists this model |
| Main fuse | ANL 500 | Recommended fuse A | Sleipner’s page for this modelThe rating on Sleipner’s page for this model. The fuse holder is SMANLHOLD. |
| Replacement motor | 9 0105 24 | SEP150 24V | Sleipner’s parts page lists this model |
What the manual and listings say
PRO means proportional: the joystick sets how hard it pushes. The 2026 catalog says to expect close to continuous run time at half power or less. Twin props in a 215 mm tunnel, 24 V only, with the SE150's motor. It is for boats of 44 to 64 ft, depending on weight and windage. It is rated 182 kg at 24 V and 150 at 21.
The page rates the brushed motor for two to three minutes' running at 20 C. The control panel switches itself off after about six minutes unused. Sleipner's FAQ wants the tunnel at least three quarters of its diameter below the surface, never less than half.
Replacement and close alternatives
The replacement: Sleipner E150 eVision. Sleipner’s own page for this model links it as the replacement.
These are Sleipner’s nearest current sizes by thrust, in any of its lines.
- Nearest below: Sleipner SEP120/215T-24V, 306 lb, $6,291.
- Nearest above: Sleipner SE170/250TC, 463 lb, $6,264.
Other makers’ current units of the same style, for the same end, within a quarter of its published thrust:
- VETUS Bow Pro Boosted 180, 397 lb, $7,749.
- Max Power CT165, 408 lb, $3,684.
- Lewmar 250TT GEN 2 Tunnel Thruster, 308 lb, $4,949.